Tech Video Clips

Result: Push Button with No Debouncing (Togglin...

A test of the actual circuit with the Atmel AVR microcontroller programmed showing the push button without any debouncing and two LEDs toggled when the push button is pressed and...

Result: Push Button with No Debouncing (Togglin...

A test of the actual circuit with the Atmel AVR microcontroller programmed showing the push button without any debouncing and two LEDs toggled when the push button is pressed and...

Result: Push Button with Hardware Debouncing (T...

A test of the actual circuit with the Atmel AVR microcontroller programmed showing the push button with debouncing using a capacitor across the two leads of the push button switch....

Result: Push Button with Hardware Debouncing (T...

A test of the actual circuit with the Atmel AVR microcontroller programmed showing the push button with debouncing using a capacitor across the two leads of the push button switch....

Result: Outputting a PWM (Pulse Width Modulatio...

Only three servos were available, so the true output will not be shown. Important aspects of outputting to more than one pin are as follows: - Make sure the pins...

Result: Outputting a PWM (Pulse Width Modulatio...

Only three servos were available, so the true output will not be shown. Important aspects of outputting to more than one pin are as follows: - Make sure the pins...

Result: Outputting a PWM (Pulse Width Modulatio...

Important aspects of outputting to more than one pin are as follows: - Make sure the pins that will output the PWM are set for output data direction (i.e. DDRB...

Result: Outputting a PWM (Pulse Width Modulatio...

Important aspects of outputting to more than one pin are as follows: - Make sure the pins that will output the PWM are set for output data direction (i.e. DDRB...

Result: Outputting a PWM (Pulse Width Modulatio...

In this program, interrupts are used to provide an interrupt every time the PWM counter reaches the top value in ICR1 (Input Capture Register 1). Within the ISR (Interrupt Service...

Result: Outputting a PWM (Pulse Width Modulatio...

In this program, interrupts are used to provide an interrupt every time the PWM counter reaches the top value in ICR1 (Input Capture Register 1). Within the ISR (Interrupt Service...

Result: Create a Chasing 'x' on the LCD to Dete...

A moving 'x' is displayed along all possible LCD cursor locations and the actual location of the 'x' is displayed on the bottom right of the LCD to inform what...

Result: Create a Chasing 'x' on the LCD to Dete...

A moving 'x' is displayed along all possible LCD cursor locations and the actual location of the 'x' is displayed on the bottom right of the LCD to inform what...